Bollard / Pipe / Galvanized / Plain End / Slip-On Fence Cap

  • Post = Usually 4″ Pipe Size (4-1/2″ OD x .237″ Wall)
  • Post = Length Is Usually 7′ (Above Ground 4′ & Buried 3′)
  • Post = 9/16″ Hole Drilled Thru Both Sides For Eyebolt
  • Post = Customer To Drill Holes & Weld Eyebolt
  • Post = 1/2″ x 6″ Eyebolt
  • Post = No Cap Option (Usually Filled w/ Concrete)
  • Post = Weld-On Cap Option
  • Post = Threaded Cap Option
  • Post = Slip-On Cap Option
  • Sleeve = Usually 5″ Pipe Size (5-5/8″ OD x .258″ Wall)
  • Sleeve = Length Is Usually 3′ (Buried 2′-6)
  • Sleeve = 1/2″ Eyebolt Eye Only Welded To Outside
  • Sleeve = Customer To Cut & Weld Eyebolt
  • Sleeve = See “Penta Bollard Lock System” Option Below

Description

PENTA LOCK SYSTEM OPTION
  • Use As Alternate To Eyebolt Bollard Lock System
  • Penta Bollard Lock System
  • Includes Bolt
  • Wrench or Socket End Only Sold Separate
  • Penta = 5 Point Head Bolt (5 Sides)
  • Penta Bolt Head Size Is Measured From Point To Point
  • Penta = Security Style Head
  • Penta = Cannot Remove With Standard Wrench
  • Penta = Wrench Unavailable From Average Stores
  • Penta = Bolt Common On Manhole Covers
  • Penta = Bolt Common On Utility Water & Gas Valves
  • BOLLARD 4" SCH40 Pipe Size (4-1/2" OD) = SLEEVE 5" SCH40 Pipe Size (5-5/8" OD)
  • BOLLARD 6" SCH40 Pipe Size (6-5/8" OD) = SLEEVE 7-1/4" OD x .250"Wall DOM Round Tube
  • BOLLARD 8" SCH40 Pipe Size (8-5/8" OD) = SLEEVE 9-1/4" OD x .250"Wall DOM Round Tube
  • Tube = 1.625" Outside x 2.500"Long x .188"Wall
  • Saddled One End To Weld-On To 5" Pipe (5-5/8"OD)
  • Fits Range Of Pipe 2-1/2" To 8"
  • Penta Bolt = 1/2" x 2-1/2" (13/16" Pentagon 5Point Head)
  • Penta Bolt Includes Captive Flat Washer
  • Penta Bolt Lock System Includes Stainless Lock Washer
  • Penta Bolt = Stainless
  • Regular Wrench Will Not Work
  • T-Handle Socket Wrench Sold Separate =ZH700-7100
  • Or Use Socket End Only Sold Separate =ZH700-7650
  • Drill 5/8" Hole In Bollard Sleeve
  • Drill 5/8" Hole In Bollard
  • Weld Bollard Lock To Sleeve

  • BOLLARD 4" SCH40 Pipe Size (4-1/2" OD) = SLEEVE 5" SCH40 Pipe Size (5-5/8" OD)
  • BOLLARD 6" SCH40 Pipe Size (6-5/8" OD) = SLEEVE 7-1/4" OD x .250"Wall DOM Round Tube
  • BOLLARD 8" SCH40 Pipe Size (8-5/8" OD) = SLEEVE 9-1/4" OD x .250"Wall DOM Round Tube

PART NUMBER PICTURE PENTA LBS EA
ITEM HEAD SIZE THREAD
ZH800-7050 Lock 13/16" Bolt Included 0.830#
ZH800-7100 Wrench w/Socket 13/16" N/A 1.000#
ZH800-7650 Socket End Only 13/16" N/A 0.500#
ZF312-3150 Bolt
Stainless
13/16" 1/2" x 2-1/2" 0.178#