Bollard / Pipe / Black / Plain End / No Cap

BOLLARD NO CAP

Post = Usually 4″ Pipe Size (4-1/2″ OD x .237″ Wall)
Post = Length Is Usually 7′ (Above Ground 4′ & Buried 3′)
Post = 9/16″ Hole Drilled Thru Both Sides For Eyebolt
Post = Customer To Drill Holes & Weld Eyebolt
Post = 1/2″ x 6″ Eyebolt
Post = No Cap Option (Usually Filled w/ Concrete)
Post = Weld-On Cap Option
Post = Threaded Cap Option
Post = Slip-On Cap Option
Sleeve = Usually 5″ Pipe Size (5-5/8″ OD x .258″ Wall)
Sleeve = Length Is Usually 3′ (Buried 2′-6)
Sleeve = 1/2″ Eyebolt Eye Only Welded To Outside
Sleeve = Customer To Cut & Weld Eyebolt
Sleeve = See “Penta Bollard Lock System” Option Below

Categories: Pipe Fitting, Bollard / Pipe Gate, Concrete Related, Ornamental, Chain Link (Fence), Culvert Accessory

Description

Description

PENTA LOCK SYSTEM OPTION
Use As Alternate To Eyebolt Bollard Lock System
Penta Bollard Lock System Includes Bolt Wrench or Socket End Only Sold Separate Penta = 5 Point Head Bolt (5 Sides) Penta Bolt Head Size Is Measured From Point To Point Penta = Security Style Head Penta = Cannot Remove With Standard Wrench Penta = Wrench Unavailable From Average Stores Penta = Bolt Common On Manhole Covers Penta = Bolt Common On Utility Water & Gas Valves

BOLLARD 4" SCH40 Pipe Size (4-1/2" OD) = SLEEVE 5" SCH40 Pipe Size (5-5/8" OD)
BOLLARD 6" SCH40 Pipe Size (6-5/8" OD) = SLEEVE 7-1/4" OD x .250"Wall DOM Round Tube
BOLLARD 8" SCH40 Pipe Size (8-5/8" OD) = SLEEVE 9-1/4" OD x .250"Wall DOM Round Tube

CLICK HERE PENTA TYPICAL BOLLARD LOCK INSTALL SUGGESTION
CLICK HERE TYPICAL BOLLARD SIZES
CLICK HERE UTILITY TYPICAL BOLLARD SPECIFICATION

Tube = 1.625" Outside x 2.500"Long x .188"Wall
Saddled One End To Weld-On To 5" Pipe (5-5/8"OD)
Fits Range Of Pipe 2-1/2" To 8"
Penta Bolt = 1/2" x 2-1/2" (13/16" Pentagon 5Point Head)
Penta Bolt Includes Captive Flat Washer
Penta Bolt Lock System Includes Stainless Lock Washer
Penta Bolt = Stainless
Regular Wrench Will Not Work
T-Handle Socket Wrench Sold Separate =ZH700-7100
Or Use Socket End Only Sold Separate =ZH700-7650
Drill 5/8" Hole In Bollard Sleeve
Drill 5/8" Hole In Bollard
Weld Bollard Lock To Sleeve

PART NUMBER	PICTURE	PENTA			LBS EA
PART NUMBER	PICTURE	ITEM	HEAD SIZE	THREAD	LBS EA
ZH800-7050		Lock	13/16"	Bolt & Lock Washer Included	0.830#
ZH800-7100		Wrench w/Socket	13/16"	N/A	1.000#
ZH800-7650		Socket End Only	13/16"	N/A	0.500#
ZF312-3150		Bolt Stainless	13/16"	1/2" x 2-1/2"	0.178#