Flat / Abrasion Resisting

 

FLAT AR400 APPLICATION
AR400
ABRASION RESISTING FLAT BAR
FACTORY ROLLED MILL EDGE
  • No ASTM number is designated
  • Heat Treated For High Hardness
  • Hardness is all the Way Through the Bar
  • Heat Treated for High Tensile Strength
  • Will Resist Severe Abuse and Abrasion
  • Weldable
  • 400 Brinell Uniform Hardness
  • 180000 Minimum PSI Tensile Strength
  • For Use in Severe Wear Applications
  • No Camber
  • Length - 20'
APPLICATION
  • Ore Car Bottoms & Liner
  • Dipper & Bucket Liner
  • Coal Washer Quarry Chute
  • Front-End Loader Liner
  • Sand & Gravel Chute
  • Conveyor Buckets & Flights
  • Sizing Grates & Grizzlies
  • Bulldozer Mold Board
  • Truck Bottom Liner
TYPICAL CHEMICAL ANALYSIS
Carbon (C) = .21 Max
Manganese (MN) = 1.50 Max
Phosphorus (P) = .020 Max
Sulphur (S) = .015 Max
Silicone (SI) = .60 Max
Molybdenum (MO) = .40 Max
Boron (B) = .0005 Min
 TYPICAL MECHANICAL PROPERTY
Tensile (PSI) = 17000#-19000#
Yield (PSI) = 160000# Typical
Brinell Hardness = 363 to 444

 

PART NUMBER SIZE LBS EA
FL170-Q2 1/4" x 2" 35.00
FL170-Q2H 1/4" x 2-1/2" 42.70
FL170-Q3 1/4" x 3" 52.00
FL170-Q4 1/4" x 4" 68.00
FL170-Q6 1/4" x 6" 102.00
FL170-382 3/8" x 2" 51.00
FL170-383 3/8" x 3" 77.00
FL170-384 3/8" x 4" 102.00
FL170-385 3/8" x 5" 128.00
FL170-386 3/8" x 6" 153.00
FL170-H2 1/2" x 2" 69.00
FL170-H3 1/2" x 3" 103.00
FL170-H4 1/2" x 4" 136.00
FL170-H6 1/2" x 6" 204.00
FL170-342 3/4" x 2" 103.00
FL170-343 3/4" x 3" 154.00
FL170-344 3/4" x 4" 205.00
FL170-W2 1" x 2" 138.00
FL170-W2H 1" x 2-1/2" 170.00
FL170-W3 1" x 3" 207.00
FL170-W3 1" x 3" 276.00
FL170-W6 1" x 6" 409.00