 |
CHANNEL SIZE AND WEIGHT CHART |
STEEL |
- STEEL Channel is classified into two categories
- Bar Size = Sizes with any leg 2-1/2″ and smaller
- Structural Size = Sizes with any leg 3″ and greater
- Structural Channel Designated with “C” preceding size
- For example: C3″ x 4.1#
- MILD STEEL Specification = ASTM-A36
- ASTM = American Society for Testing and Materials
|
- STEEL Channel "Bar Size"

- Designated By Outside Measurement in Inches
- Usually Sharp Corner
- Sometimes Inside Tapered Corner
- Designation Is Actual Dimension
- IE: 2 x 1 x 1/8
|
- STEEL Channel "American Standard"

- Designated With Letter "C" Preceding Size
- Designated By Width Of Channel
- Designation Does Not Refer To Leg Dimension
- Designation Includes Weight Per Foot
- IE: C3 x 4.1#
|
- STEEL Channel "Miscellaneous Ship"

- Designated By Width of Channel
- Designation Does Not Refer
To Leg Dimension
- Designation Includes Weight Per Foot
- IE: MC6 x 18#
- Has Thicker Web
- Has Taller Leg
- Has Very Little Taper
|
 |
- STEEL Channel "Miscellaneous Junior"

- Designated By Width of Channel
- Designation Does not Refer to Leg Dimension
- Designation includes Weight per foot
- IE: MC8 x 8.5#
- Common For Staircase Sides
|
 |
ALUMINUM |
- ALUMINUM Specification
- ALUMINUM CHANNEL is officially classified in three categories
- When structural shapes were first produced in aluminum they were “rolled” similar to steel structural shapes and were thus also designed similar to them: these are “AMERICAN STANDARD”. With the development of the “extrusion” process it became evident that the “AMERICAN STANDARD” profiles do not utilize the metal efficiently so the “ALUMINUM ASSOCIATION” developed new sizes. These new sizes have better structural stability and the flanges match up better to beams of the same height.
|
- ALUMINUM "American Standard" 6061-T6 x 25' Length

- Radius Inside Corner
- Tapered Leg
- Same Profiles as Steel
|
- ALUMINUM"Aluminum Association" 6061-T6 x 25' Length

- Square Inside Corner
- Non Tapered Leg
|
- ALUMINUM"Sharp Corner" 6063-T52 x 16' Length

|
STAINLESS |
- STAINLESS Specification
- Special Order Channel Stainless 304 x 20′ Random
|
ALSO AVAILABLE |
|