SQUARE & MITER AUTOMATIC BANDSAWING
OXY - FUEL PLATE  PATTERN BURNING
 PLASMA HI-DEF PATTERN  BURNING
 LASER 3000 WATT PLATE BURNING
1/2" x 12'  250TON PLATE BENDING
HOLE DRILLING  &  PUNCHING
1/2” x 12’  PLATE SHEARING
 PIPE & BOLT THREADING
CENTERLESS GRINDING
REBAR FABRICATING
PLATE ROLLING

Distributor of Metals & Fabrication Hardware

Address:
Fax:
Website:
E-mail:

600 Ophir Road   l  Oroville, CA  95966  USA   
(530) 533-3453
www.allmetalssupply.com
sales@allmetalssupply.com      

[]

 

FREE DELIVERY DAILY  ($100 MINIMUM ORDER) TO (CALIFORNIA ONLY & SELECTED AREAS OF) OROVILLE, DURHAM, CHICO, CORNING, RED BLUFF, ORLAND, WILLOWS, PRINCETON, COLUSA, LINCOLN, WHEATLAND, YUBA CITY, MARYSVILLE, LIVE OAK, GRIDLEY, BIGGS, AND ONCE WEEKLY TO QUINCY, CHESTER , LAKE ALMANOR, HURLONG, SUSANVILLE, AND ONCE WEEKLY TO GRASS VALLEY AND NEVADA CITY AREAS.

Home | Materials | Services | Fasteners | Trailer Parts | Hardware | Data | Contact Us | History | Links
  Stove Handle Spring |  Laser Pattern Burning |  Plasma Pattern Cut |  Hillside Washers | Fiberglass Rebar

Search for:

HINGE / HASP / LATCH
Abrasive / Blade / Drill | Chain / Cable / Rope | Concrete Products | Hinge / Hasp / Latch | Ornamental | Tie Downs
  Paint / Solvent / Oil | Pipe Fittings | Tools | Misc Hardware | Safety Products | Simpson Strong Tie |  Rubber Products



Weld-On Hinge    


 

   






Conveyor Roller

        

  

  


 


Use with 1-1/2" diameter tailgate posts.


HINGE

 SQUARE  /  BUTT

 

 

 

 

NON - REMOVABLE SPUN PIN  /  SURFACE MOUNT STYLE

 

 

bulletUSE A HINGE THICKNESS APPROXIMATELY THE SAME AS THE MATERIAL TO WHICH THE HINGE IS TO BE ATTACHED.

 

bulletFULL SURFACE

bulletHALF SURFACE

 

PLAIN MILD STEEL

 

bulletNOT SWAGED      

PART NUMBER

OPEN WIDTH

PIN

THICKNESS

LBS EA

ZH340-2000

 

2

.190

.092

0.19

ZH340-2200

 

3

.242

.092

0.63

ZH340-2300

 

3-1/2

.272

.123

0.82

ZH340-2400

 

4

.272

.129

1.00

ZH340-2500

 

5

.295

.146

1.20

ZH340-2550

 

6

.375

.180

4.00

ZH340-2600

 

6

.625

.250

5.00

E2

                   

HINGE

 

6’-0  /  PIANO  /  CONTINUOUS  /  NO HOLES

 

 

REMOVABLE PIN (VERY DIFFICULT HOWEVER)   / SURFACE MOUNT STYLE

 

bulletUSE A HINGE THICKNESS APPROXIMATELY THE SAME AS THE MATERIAL TO WHICH THE HINGE IS TO BE ATTACHED.
bulletDIFFICULT TO SAW TO LENGTH BECAUSE PIN TENDS TO SPIN.

 

bulletFULL SURFACE

bulletHALF SURFACE

 

PLAIN MILD STEEL

bulletNOT SWAGED      

PART NUMBER

WIDTH OPEN

PIN

THICKNESS

LBS EA

ZH340-2800

 

1

.091

.040

1.20

ZH340-3000

 

1-1/2

.120

.050

2.14

ZH340-3100

 

2

.187

.060

3.41

ZH340-3200

 

3

.250

.090

8.12

ZH340-3300

 

4

.375

.120

14.8

ZH340-3400

 

6

.500

.188

31.0

 

ALUMINUM   /   5052   /   MILL FINISH

PART NUMBER

WIDTH OPEN

PIN

THICKNESS

LBS EA

ZH340-4000

 

2

.250

.093

2.06

ZH340-4050

 

4

.375

.120

5.00

 

STAINLESS   /   SS-T304   /   2B MILL FINISH

PART NUMBER

WIDTH OPEN

PIN

THICKNESS

LBS EA

ZH340-4500

 

2

.250

.070

4.87

ZH340-4550

 

4

.375

.120

14.8

E3

HINGE

LIFT OFF

ROUND  /  BULLET  /  WELD-ON  /  TEARDROP

 

bulletVERY LITTLE SPACE BEHIND WELDS FOR CORROSION
bulletWELD TWO HINGES AS LIFT-OFF OR TRAPPED (UN-REMOVABLE)
bulletPLAIN MILD STEEL  /  FIXED PLAIN MILD STEEL PIN  /  BRASS WASHER

    

                         

                

AVOID WELDING SHADED AREA

bulletWELDING OPTIONS

 

                    

WITHOUT ZERK

PART NUMBER

DIAMETER

PIN

LENGTH

LBS EA

ZH340-0500

.440

.281

2.80     =

70MM

 

0.12

ZH340-0600

.630

.438

4.80     =

120MM

 

0.42

ZH340-0650

.780

.500

6.00     =

150MM

 

0.81

ZH340-0680

.940

.625

8.00     =

200MM

 

1.47

 

WITH ZERK

PART NUMBER

DIAMETER

PIN

LENGTH

LBS EA

ZH340-0200

.630

.375

4.00

0.36

ZH240-0250

.690

.439

5.00

0.60

ZH340-0260

.780

.531

7.00

1.02

 

BARREL HINGE

 

 

bulletTHE LEAST EXPENSIVE LIFT OFF HINGE WE HAVE

PART NUMBER

PIN

OUTSIDE DIMENSION

NOTE

LBS EA

ZH340-0455

.50  x  1”

.750”  x  3”

NO ZERK OR BEARING

.31

 

BATWING

+

=

PART NUMBER

PIN

THICKNESS

LBS EA

ZH340-1000

.625 x 1.00

.125

.31

E4

HINGE

LIFT OFF

SQUARE

 

bulletPLAIN MILD STEEL
bulletHOT ROLLED FINISH
bulletPIN = STAINLESS T-304
bulletCHROME STEEL BALL BEARING
bulletWELD AS LIFT-OFF OR TRAPPED

 

                                   

PART NUMBER

SQUARE

PIN

PAIR CAPACITY

LENGTH

LBS EA

ZH340-0700

1.00

.500

400#

4.2

1.2

ZH340-0800

1.50

.625

600#

6.2

4.5

ZH340-0900

2.00

.750

1200#

8.0

9.5

 

RECTANGULAR

 

bulletPLAIN MILD STEEL
bulletCOLD ROLLED FINISH
bulletPIN = PLAIN MILD STEEL
bulletCHROME STEEL BALL BEARING
bulletNO CAPACITY RATINGS
bulletWELD AS LIFT-OFF OR TRAPPED

 

                                      

PART NUMBER

RECT

PIN

LENGTH

LBS EA

ZH340-0950

1.00  x  1.30

.625

5

2

ZH240-0960

1.20  x  1.80

.781

7

5

E5

 
                                                             
 

SPRING  /  3”  SQUARE

 

·        ZINC PLATED MILD STEEL

·        SPRING LOADED IN CLOSED POSITION

·        .200 DIAMETER HOLES

·       2EA PER PACKAGE 

PART NUMBER

OPEN

THICK

METAL

LBS EA

ZH340-1600

2.80  x  2.80

1.00

.060

.50

 

SPRING  /  4-1/2”  SQUARE

 


         

bullet2 HINGES =   85# CAP
bullet3 HINGES = 110# CAP
bulletPRIMERED MILD STEEL
bullet.281 DIAMETER HOLES
bulletADJUSTABLE TENSION

PART NUMBER

OPEN

METAL

LBS EA

ZH340-2362

4.50  x  4.50

.098

1.50

 

SPRING  /  2”  x  3”

 

 

·        PLAIN MILD STEEL

·       SPRING LOADED IN OPEN POSITION

PART NUMBER

WIDTH

HEIGHT

PIN

METAL

LBS EA

ZH290-2365

2.00

3.00

.125

.060

.15

 

SPRING  /  12”  LONG

 

           

 

bulletADJUSTABLE TENSION
bulletBLACK PAINTED STEEL

PART NUMBER

LENGTH

DIAMETER SPRING

LBS EA

ZH340-2361

12”

1”

1.50

E6

                           
   

 
 

UPHILL / DOWNHILL

 

bulletUP TO 15° SLOPE
bullet2000# CAPACITY PER PAIR
bulletBRONZE BEARINGS
bulletBLACK PAINTED STEEL
bulletLEAFS = 0.50 x 2.90 x 9.90

PART NUMBER

OVERALL OPEN

PIN

METAL

LBS EA

ZH340-1900

11.50  x  21.50

.750

.500

6

 

FORMED W/ ZERK

 

bulletPIN = 1/2 x 4 GR2 HHCS W/NYLOCK
bullet5/16 x 2-1/4  FLAT BAR
bulletPLAIN MILD STEEL

PART NUMBER

OVERALL

PIN

METAL

LBS EA

ZH340-0450

2.5  x  4.3  x  6.0

.500

.313

2.62

 

TEE

 



bullet.313 COUNTERSUNK HOLES
bulletZINC PLATED MILD STEEL

 

PART NUMBER

OVERALL

PIN

METAL

LBS EA

ZH340-4750

5.50  x  9.69

.390

.105

2

 

DIAMOND

 

 

·        .313 COUNTERSUNK HOLES

bulletZINC PLATED MILD STEEL

 

PART NUMBER

OVERALL

PIN

METAL

LBS EA

ZH340-4700

3.08  x  15.39

.390

.105

2

E7

                       
 

PIN LAG

 

bulletZINC PLATED MILD STEEL

PART NUMBER

PIN

OA LENGTH

THREAD LENGTH

LBS EA

ZH340-5000

1/2” = .450

2.06

4.75

0.281

ZH340-5100

5/8” = .570

4.06

6.06

0.482

ZH340-5200

3/4” = .680

5.12

7.12

0.880

ZH340-5300

7/8” = .890

8.81

5.62

1.550

 

PIN BOLT

 

bulletZINC PLATED MILD STEEL
bulletWITH 2EA NUTS & FW

PART NUMBER

PIN

OA LENGTH

THREAD LENGTH

LBS EA

ZH340-5500

.450

6.870

5.750

0.51

ZH340-5600

.570

13.12

11.50

1.33

ZH340-5700

.680

13.12

11.50

1.92

ZH340-5800

.890

13.48

11.50

2.82

 

PIN

 

bulletTWO HOLES FOR 3/8” BOLTS
bulletZINC PLATED MILD STEEL

PART NUMBER

PIN

OVERALL

METAL

LBS EA

ZH340-6150

1/2” = .462

1.26  x  1.50  x  5.94

.220

.50

ZH340-6200

5/8” = .580

1.26  x  1.50  x  5.94

.220

.51

E8

 
 

SOCKET STRAP END

 

 

bulletHOLES FOR 3/8” CARRIAGE
bulletFOR #12 FLAT HEAD
bulletZINC PLATED MILD STEEL

PART NUMBER

OVERALL

SOCKET

METAL

LBS EA

ZH340-6000

1.25

x

6.25

 

1/2” = .480

.190

0.35

ZH340-6050

1.25

x

10.39

 

5/8” = .600

.220

0.64

ZH340-6070

1.52

x

14.63

 

3/4” = .710

.250

1.32

 

SOCKET BOLT END

 

 

bulletZINC PLATED MILD STEEL
bulletWITH 2NUTS

PART NUMBER

LENGTH

SOCKET

EYE DEPTH

EYE OD

LBS EA

ZH340-6080

6.25

1/2” = .500

.688

1.00

0.35

ZH340-6085

6.50

5/8” = .690

.750

1.25

0.64

ZH340-6090

6.50

3/4” = .782

.938

1.50

1.32

 

MAKE YOUR OWN HINGE  /  PIPE (XH = SCH80)  &  ROUND BAR

 

·        PIN STOCK VARIES

·        LOOSE FIT

·        21’  LENGTHS 

·        WE CAN CUT

·        1018 = MILD STEEL

·        1045 = HIGH CARBON

·        1144 = RESISTS BENDING

·        4140 = RESISTS BENDING & WEAR

PART NUMBER

PIPE SIZE = #FT

OD x  WALL x ID

PIN SIZE = LBS FT

 

PT244-3880

 

3/8

=

0,74#

0.68

x

.13

x

0.42

3/8

=

0.38#

 

PT244-H80

 

1/2

=

1.09#

0.84

x

.15

x

0.55

1/2

=

0.68#

 

PT244-3480

 

3/4

=

1.47#

1.10

x

.15

x

0.74

11/16

=

1.28#

 

PT244-W80

 

1

=

2.18#

1.30

x

.18

x

0.96

15/16

=

2.35#

 

PT244-WQ80

 

1-1/4

=

3.00#

1.70

x

.19

x

1.30

1-1/4

=

4.15#

E9

                                                                   

LATCH

 

    SPRING  /  L - HANDLE

bulletZINC PLATED MILD STEEL
bullet.135”  (10GA)  SHEET METAL FRAME
bullet4”  LONG HANDLE

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-0200

1.75  x  5.00  x  5.75

1/2”  ROUND  x  1” LONG

0.9

 

SPRING  /  D - HANDLE

 

 

bulletPLAIN MILD STEEL BODY
bulletZINC PLATED MILD STEEL PIN
bulletTUBE BODY MEASURES 2 x 1-1/2  (1.25” LONG)

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-0220

1.5  x  2.5  x   5.00

5/8”  ROUND  x  7/8” LONG

0.7

 

SPRING  /  FLAT BAR

 

bulletZINC PLATED MILD STEEL

PART NUMBER

OVERALL

FLAT END

LBS EA

ZH400-0250

1.5  x  2.0  x   5.25

1/2”   x   3/4”   x   1”

1.0

 

SPRING  /  L-HANDLE

bulletZINC PLATED MILD STEEL
bullet.065  (16GA) FORMED SHEET METAL

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-0100

1.25  x  3.75

1/4”  ROUND  x  1/2”  LONG

0.2

 

TIPPER

  

 

bulletHOLDS TILT TRAILER BED TO TONGUE

PART NUMBER

MOUNTING HOLES

RATING

LBS EA

ZH400-2000

3/8”

1000#

1.20

E10

                     

RING PULL   (SMALL)  /  SPRING LOADED

 

bulletZINC PLATED MILD STEEL
bullet1-1/4” DIAMETER KEY RING STYLE HANDLE

PART NUMBER

BODY

PIN

LBS EA

ZH400-0210

11/16” DIAMETER  x  2”

1/2”  ROUND  x 1/2”  LONG

0.20

 

RING PULL   (LARGE)  /  SPRING LOADED

 

bulletZINC PLATED MILD STEEL
bullet5/16”  ROUND BAR BENT TO EYE FOR RING

PART NUMBER

BODY

PIN

LBS EA

ZH400-0225

1”  DIAMETER   x  7”

3/4”  ROUND  x  3”  LONG

2.00

 

SLAM   /  SPRING LOADED

 

bulletPLAIN MILD STEEL
bullet1/2”  ROUND HANDLE  x  3.750”   LONG
bulletWITH GREASE FITTING  (ZERK)
bulletWELD ON   /   BODY TUBE WALL  = .188” THICK

PART NUMBER

BODY

PIN

LBS EA

ZH400-0550

1.25  x  5.75

3/4”  ROUND  x  1” LONG

2.00

 

CLEVIS WITH PIN

 

bulletPLAIN MILD FORGED STEEL BODY
bulletZINC PLATED MILD STEEL PIN

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-0994

2.00  x  3.00  x  5.00

.50

3.00

 

BARREL BOLT  8”

 

bulletZINC PLATED MILD STEEL
bullet.093 METAL THICKNESS

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-6000

2.78  x  8.00  x  1.00

.59

1.50

E11

               

LATCH

OVER CENTER

bulletZINC PLATED MILD STEEL

PART NUMBER

OVERALL

LOCK HOLE

LBS EA

ZH400-5000

.50  x  1.25  x  4.00

.344

0.25

 

SLAM ACTION STRIKE RECEIVER

bulletDIE CAST YELLOW ZINC
bulletTWO THREADED MOUNTING HOLES  1/4" - 20TPI
bulletDIE CAST YELLOW ZINC

PART NUMBER

OVERALL

ROD THAT FITS

LBS EA

ZH400-0540

1/2”  x  1-1/4”  x  3”

3/8”  DIAMETER

0.80

GATE

bulletZINC PLATED MILD STEEL

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-4000

2.00  x  2.00  x  4.00

.375

1.00

 

HASP  /  STANDARD

bulletZINC PLATED MILD STEEL
bullet1-1/2”  WIDE

PART NUMBER

LENGTH

LOCK HOLE

METAL

LBS EA

ZH320-0100

3.25

0.44

0.07

0.21

ZH320-0200

4.50

0.44

0.07

0.26

ZH320-0300

6.00

0.44

0.08

0.41

 

HASP  /  HEAVY DUTY

bulletZINC PLATED MILD STEEL
bullet2-1/2”  WIDE3

PART NUMBER

LENGTH

LOCK HOLE

METAL

LBS EA

ZH320-0400

7.00

0.92

0.150

1.61

E12

                       

 


LATCH

      REAR VAN DOOR

bulletFOR USE WITH 3/4” STD PIPE  (NOT INCLUDED)
bulletCAN BE MADE TO ANY HEIGHT
bulletLOCKABLE
bulletZINC PLATED MILD STEEL HARDWARE PARTS

PART NUMBER

HANDLE DIMENSION

LBS EA

ZH400-1500

1/4  x  1-1/4  FLAT BAR  x  13” LONG

7.0

 

CANE BOLT

bulletPAINTED BLACK MILD STEEL
bulletLOCKABLE
bulletMADE FROM ANGLE, PIPE, FLAT & ROUND BAR

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-0900

1.50  x  7.50  x  25.00

3/4” ROUND  x  5” LONG

7.0

 

PIN BENT WITH PIPE

 

bulletPLAIN MILD STEEL

PART NUMBER

PIN SIZE

LBS EA

ZH400-6010

1/2”

1.2

 

BARREL BOLT  /  10”

 

bulletPLAIN MILD STEEL
bullet5/8” ROUND HANDLE  x  4-3/4” LONG
bulletMADE FROM ANGLE, SQ TUBE & ROUND

PART NUMBER

OVERALL

PIN

LBS EA

ZH400-6010

1.25  x  6.0  x  10.50

.719 ROUND  x  3” LONG

2.5

E13

             

LATCH

T HANDLE WITH CAM

 

 

bulletCHROME PLATED MILD STEEL HANDLE
bulletZINC PLATED MILD STEEL SHAFT/CAM
bullet5/16” SQUARE DRIVE

PART NUMBER

HANDLE

SHAFT

LBS EA

ZH400-1000

1.00  x  4.00

.313   x   3.50

0.70

 

2-POINT SWIVEL ROD   /   FOR T-HANDLE

 

 

 

bullet DIE CAST CENTER ACCEPTING 5/16” SQUARE
bullet34” STEEL RODS EACH WAY   (EXTENDED LENGTH  =  69.50”)
bulletINCLUDES 2 ROD GUIDES

PART NUMBER

EXTENDED LENGTH

SHAFT

LBS EA

ZH400-1010

69.50”

5/16”  ROUND

1.6

 

CAB LATCH   /   LEVER HANDLE

 

 

bulletSTAINLESS STEEL MILL FINISH  /   RIGHT HANDED
bulletHAS HOLE FOR 5/16" SQUARE

       - FOR T-HANDLE (IF YOU WANT TO OPEN FROM INSIDE)

bulletHAS LEVER HANDLE ATTACHED

       - FOR OPENING & CLOSING FROM OUTSIDE

       - ROTATES COUNTER CLOCKWISE

PART NUMBER

METAL

OVERALL

LBS EA

ZH400-0450

STAINLESS STEEL

1.15  x  3.39  x  6.18

1.30

FLUSH LATCH WITH LOCK   /   LOCK ONLY

A =      B = 

 

bulletGALVANNEALED MILD STEEL

PART NUMBER

OVERALL

RECESS DEPTH

LBS EA

A =

ZH400-0500

4.25  x  5.50

1”

1.15

B =

ZH400-0600

VARIOUS KEY NUMBERS AVAILABLE

0.09

E14

                         

HANDLE

BIG  /  WELD ON

 

bulletPLAIN MILD STEEL
bulletENDS FLAT TO APPROX 3/4” X 2”

PART NUMBER

OVERALL

DIAMETER

LBS EA

ZH300-0205

2.13  x  13.13

..500

0.79

 

BIG  /  BOLT ON

 

 

bulletCHROME PLATED MILD STEEL
bullet.313  COUNTERSUNK HOLES

PART NUMBER

OVERALL

DIAMETER

LBS EA

ZH300-0200

1.63  x  2.0  x  8.0

1/2  x  1  FLAT AT WIDEST

0.75

 

SMALL

 

 

bulletPLAIN MILD STEEL
bulletPRESSED .065” (16GA) SHEET METAL

PART NUMBER

OVERALL

HANDLE DIAMETER

LBS EA

ZH300-0100

1.25  x  1.5  x  5.75

3/8”  x  5/8”  AT WIDEST

0.17

 

CHEST

 

 

bulletZINC PLATED MILD STEEL

PART NUMBER

OVERALL

HANDLE DIAMETER

LBS EA

ZH300-0300

3.53

x

4.23

0.33

0.40

E15

                           

HANDLE

THREADED LEVER  /  ONE SIDE

 

 

bulletZINC PLATED MILD STEEL
bullet1”  THREAD DEPTH
bullet5/8”  ROUND HANDLE DIAMETER

PART NUMBER

OVERALL

THREAD

LBS EA

ZH300-0400

1.12  x  2.00  x  6.50

3/4” - 10 TPI  (NC)

0.60

 

THREADED LEVER  /  TWO SIDE

 

 

bulletZINC PLATED MILD STEEL
bullet1-1/8”  THREAD DEPTH
bullet5/8”  ROUND HANDLE DIAMETER

PART NUMBER

OVERALL

THREAD

LBS EA

ZH300-0500

1.12  x  2.00  x  5.50

5/8” - 11 TPI  (NC)

0.60

 

KNOB

 

bulletHARD BLACK PLASTIC
bulletGALVANIZED THREADED INSERT

PART NUMBER

DIAMETER

DEPTH

THREAD

LBS EA

ZH300-0510

2.00

1.13

3/8 - 24 TPI  (NF)

0.10

 

LEVELING FOOT

bulletSWIVEL PAD
bulletZINC PLATED STEEL
bullet1/2” - 13TPI  x  2”  LONG THREADED STUD
bulletINCLUDES NUT

PART NUMBER

FOOT SIZE

MAX LOAD

LBS EA

ZH080-0070

1-7/8”  DIAMETER  x  1-1/8”  TALL

5000#

0.40

E16

                 

STEP

FOLDING

 

bulletZINC PLATED MILD STEEL
bulletSPRING LOADED STEP
bulletSNAPS TO OPEN OR CLOSED
bulletSTAINLESS SPRING STEEL

PART NUMBER

OVERALL OPEN

STEP FACE

HOLES

LBS EA

ZH260-0100

3.75  x  4.13  x  4.63

2.13  x  4.32

.344

1.25

 

FORGED

 

bulletPLAIN FORGED MILD STEEL
bullet1.500 x  6.750  WIDE STEP FACE

PART NUMBER

OVERALL

METAL

LBS EA

ZH260-0100

1.50  x  4.00  x  8.00

9/16”  THICK

3.36

 

STEP  /  CABLE  OR  BELTED RUBBER

A         B

 

bulletPAINTED BLACK
bulletMILD STEEL
bulletAPPROX 12” - 15” TALL

PART NUMBER

TYPE

LBS EA

ZH260-0115

A

=  1-1/4” CABLE 

W/  LADDER RUNG STEP

11.8

ZH260-0115

B

=  BELTED RUBBER 

W/  GRIP STRUT STEP

11.0

 

FOLDAWAY LADDER

 

bulletPAINTED BLACK MILD STEEL
bulletTWO STEPS
bulletRETRACTS UNDER FLAT BED
bullet25.500” TALL WHEN OPEN

PART NUMBER

OVERALL

LBS EA

ZH260-0300

17.375”  WIDE AT TOP   /   14.375”  WIDE AT BOTTOM

23.0

E17

                       
   

 

TROLLEY

 

RAIL

 

    

 

bulletZINC PLATED MILD STEEL

 

PART NUMBER

LENGTH

RATING @ 24” BRACKET SPACING

LBS EA

 

ZH820-0100

20’-0

450#

27.0

 

 

 

BRACKET

 

A                 B

 

 

bulletZINC PLATED MILD STEEL
bulletINCLUDES LAG BOLTS

 

PART NUMBER

TYPE

SPLICE TYPE

LBS EA

 

ZH820-0200

A

SINGLE

3.20

 

ZH820-0250

B

DOUBLE

5.06

 

 

ROLLER

 

A                 B   

 

bulletZINC PLATED MILD STEEL
bulletBOLT TYPE USUALLY FOR STEEL
bulletFLAT TYPE USUALLY FOR WOOD

 

PART NUMBER

TYPE

DIMENSIONS

LBS EA

 

ZH820-0400

A = WITH BOLT

BOLT MEASURES

1/2” - 13TPI   x  7.120”

3.0

 

ZH820-0300

B = WITH FLAT

FLAT MEASURES

3.500”  x  5.090”

3.0

 

E18

Abrasive / Blade / Drill | Chain / Cable / Rope | Concrete Products | Hinge / Hasp / Latch | Ornamental | Tie Downs
  Paint / Solvent / Oil | Pipe Fittings | Tools | Misc Hardware | Safety Products | Simpson Strong Tie |  Rubber Products
 

  EMAIL FOR FREE METAL DATA BOOK IF YOU'RE IN OUR FREE * DELIVERY ZONE  
 *OTHERWISE $8.00 DELIVERED USPS
 CONTIGUOUS UNITED STATES ONLY ( LOWER 48 STATES ONLY)

*FREE ZONE ($100 MINIMUM ORDER) = EVERY WEEKDAY  (CALIFORNIA, USA ONLY)
SELECTED AREAS OF OROVILLE, DURHAM, CHICO, CORNING, RED BLUFF, ORLAND, WILLOWS, PRINCETON
COLUSA, LINCOLN, WHEATLAND, YUBA CITY, MARYSVILLE, LIVE OAK, GRIDLEY & BIGGS

 *FREE ZONE ($100 MINIMUM ORDER) = ONCE WEEKLY (CALIFORNIA, USA ONLY)
SELECTED AREAS OF QUINCY, CHESTER & LAKE ALMANOR ... SOMETIMES SUSANVILLE ALSO...CALL AND ASK.

 *FREE ZONE ($100 MINIMUM ORDER) = ONCE WEEKLY (CALIFORNIA, USA ONLY)
SELECTED AREAS OF GRASS VALLEY &  NEVADA CITY

 PAPERBACK  /  56  B&W PAGES  /  5.5" x 8.5"
CONTAINS SIZES, DIMENSIONS & WEIGHTS OF BASIC SHAPES IN MILD STEEL
LIKE ANGLE, CHANNEL, FLAT, TUBE, SHEET, PIPE, BEAM, ETC  
SOME BASIC INFO ON CHEMISTRY AND MECHANICAL PROPERTIES FOR MILD STEEL ITEMS
SOME BASIC FORMULAS, TOLERANCES & DECIMAL CHARTS

Home | Materials | Services | Fasteners | Trailer Parts | Hardware | Data | Contact Us | History | Links | Laser Pattern Burning

© 2009-2012   ALL METALS SUPPLY™   THIS SITE IS LAST UPDATED 09/2009