SQUARE & MITER AUTOMATIC BANDSAWING
OXY - FUEL PLATE  PATTERN BURNING
PLASMA HI-DEF PATTERN  BURNING
LASER 3000 WATT PLATE BURNING
PLATE BENDING 1/2" x 12'  250TON 
HOLE DRILLING  &  PUNCHING
PLATE SHEARING  1/2” x 12’ 

Distributor of Metals & Industrial Hardware

PIPE & BOLT THREADING
CENTERLESS GRINDING
REBAR FABRICATING
PLATE ROLLING

Address:
Fax:
Website:
E-mail:

600 Ophir Road   l  Oroville, CA  95966    USA  
(530) 533-3453
www.allmetalssupply.com
sales@allmetalssupply.com      

Home | Materials | Services | Fasteners | Trailer Parts | Hardware | Data | Contact Us | History | Links
  Stove Handle Spring |  Laser Pattern Burning |  Plasma Pattern Cut |  Hillside Washers | Fiberglass Rebar

STAINLESS FASTENER MAGNETISM ISSUES:
As related to stainless fasteners, 300 series stainless is non-magnetic in its raw material condition. Cold working can sometimes induce traces of magnetism in 300 series, depending on the severity of cold working and chemical composition of the stainless. A rise in magnetism is related to an increase in tensile strength and work hardening caused by the heat and friction of cold forming and does not reduce corrosion resistance or cause any molecular change in austenitic raw material. A higher portion of nickel can increase stability in stainless, thus decreasing work hardening and any possibilities of magnetism. Brass and silicon bronze are non-magnetic. Many stainless specs including MS hex head cap screws allow 2.0 magnetic permeability which translates to low or medium magnetism. Magnetic permeability of 1.0 translates to a very slight, glancing magnetism.

  LINK TO TORQUE CALCULATOR

*FREE ZONE = EVERY WEEKDAY  (CALIFORNIA, USA ONLY)
SELECTED AREAS OF OROVILLE, DURHAM, CHICO, CORNING, RED BLUFF, ORLAND, WILLOWS, PRINCETON
COLUSA, LINCOLN, WHEATLAND, YUBA CITY, MARYSVILLE, LIVE OAK, GRIDLEY & BIGGS

*FREE ZONE = ONCE WEEKLY (CALIFORNIA, USA ONLY)
SELECTED AREAS OF QUINCY, CHESTER & LAKE ALMANOR

*FREE ZONE = TWICE WEEKLY (CALIFORNIA, USA ONLY)
SELECTED AREAS OF GRASS VALLEY &  NEVADA CITY

PAPERBACK  /  56  B&W PAGES  /  5.5" x 8.5"
CONTAINS SIZES, DIMENSIONS & WEIGHTS OF BASIC SHAPES IN MILD STEEL
LIKE ANGLE, CHANNEL, FLAT, TUBE, SHEET, PIPE, BEAM, ETC  
SOME BASIC INFO ON CHEMISTRY AND MECHANICAL PROPERTIES FOR MILD STEEL ITEMS
SOME BASIC FORMULAS, TOLERANCES & DECIMAL CHARTS

Home | Materials | Services | Fasteners | Trailer Parts | Hardware | Data | Contact Us | History | Links | Laser Pattern Burning